• Metra 70-8113 Amplifier Integration Harness for Select 2000-2004 Toyota Vehicles
  • Metra 70-8113 Amplifier Integration Harness for Select 2000-2004 Toyota Vehicles
Metra 70-8113 Amplifier Integration Harness for Select 2000-2004 Toyota Vehicles
Metra 70-8113 Amplifier Integration Harness for Select 2000-2004 Toyota Vehicles

Metra 70-8113 Amplifier Integration Harness for Select 2000-2004 Toyota Vehicles

SKU:HA07WRQQ2
Sale price
Dhs. 146.00
Regular price
Dhs. 242.00
Unit price
per 
( 39% off )
Quantity:
Expected Delivery: 21-28 days

Tracked Shipping

Secure Payments

10 Days Return

Tracked Shipping

Secure Payments

10 Days Return

  • Factory amplifier interface harness that plugs in behind the radio
  • Retains the factory amplifier
  • Harness is set up for low level inputs using RCA Outputs from the aftermarket radio
  • 20-pin connector

Customer Reviews

Worked perfectly in 03 Camry XLE to use factory JBL AmpWorked perfectly allowing my new Planet Audio Double DIN Receiver to utilize the factory JBL Amp in my 2003 Camry XLE. I heat shrinked all unused wiring, speaker etc in the Planet Audio wiring harness and used the FL, FR, RL & RR RCAs plugs to connect to the PA Harness. Note: The male RCAs in the Metra harness are color coded to correlate with the speaker colors so Gray is front passenger (US), White is front driver (US), Violet is Rear passenger and Green is Rear Driver. (USA Driver with steering wheel on LH dash location). Also remember to connect the Blue/White wire to turn on the JBL amp, Use the P Cont, Rem Amp or ANT power blue wire in the receivers harness. Works perfectly, no engine noise either. 5Received a fake Metra harnessProduct that was shipped to me is a fake Metra 70-8113. Look at the picture and compare it to the product listing picture. IT'S TOTALLY DIFFERENT. The RCA connectors are different and looks cheap. It's not in pairs with a noise isolator loop like the original. The plug is also a different color. Metra only has 1 product design of this harness. When I plugged my Pioneer head unit up to it, there was this buzzing sound. I thought it was the HU. After two days of investigating, I noticed the difference between this harness and the real Metra harness. Beware of fake harnesses not sold by Amazon. 1Two ground wires if you have an ampJust writing a review to talk about my specific circumstance. Unfortunately, a lot of car or radio harnesses differ, so your mileage may vary. I bought this to replace the head unit for my 2002 Toyota Highlander with JBL sound system, which includes a factory amp. The stereo I purchased was a JVC KD-X330BTS with RCA connections in the back for the four speakers.Problem: The wires are color-coded, and this harness comes with a small sheet that details what each wire does, which you can use to double-check with the stereo descriptions. The problem I had was that there was an "extra" black with white stripe wire that I could not identify. After matching only the wires that needed to be matched and leaving this one out, my speakers ended up outputting loud static.Solution: It turns out that this is another ground wire (for the amp?) and needed to be connected to the solid black ground wire on this Metra harness and the solid black ground wire on my radio harness. I did this by twisting the Metra wires together in such a way that they could be inserted into one end of a butt connector, and then crimped. The radio ground wire went into the other end of the butt connector as normal.All-in-all, it's fairly simple to use. However, I'm knocking off a star because it really wasn't clear on the wire diagram that came with this harness that the black/white-stripe wire was another ground wire. Hopefully this helps anyone who ran into my specific issue.(Side note: unlike some others who reviewed this product, my Metra harness did in fact come with an orange (or orange/white-stripe) illumination wire to match my stereo's.) 4Will not work for a Lexus ES 330This product looks great and is easy to install, the only problem is that this does not work on a stock base stereo for a 2004 Lexus ES 330. It has an amp on the stock system, which requires some components that are not included in this kit.After I found this out, I ordered an Axxess TYTO-01 which came with excellent instructions, powered up an aftermarket head unit, and also allowed me to retain the stock amp. 5JBL audioI installed this with a Bluetooth head unit on my 2003 Solara with a JBL system. I tried many ways to shield the wiring, grounds, and filters. But it never stopped the sequel (with RPM) that was induced by the JBL system. I ended up reinstalling the stock head unit and getting a cigarette lighter bluetooth transmitter for my podcasts. 1I originally had cut the speaker plugs off to hook it up to the harness that came with the radio and tried passing the speaker sI used this to make it easier to hook up a panasonic stero in my 2003 Toyota Highlander with JBL amp/ speaker system. I originally had cut the speaker plugs off to hook it up to the harness that came with the radio and tried passing the speaker system through the original JBL amp and could not get rid of the horrible hissing/feedback. So I bypassed the amp and routed new speaker wiring to the jbl speakers to the radio harness which worked great! It was way easier using this harness than trying to figure out which wires to cut off and use on the JBL amp plug and saves the original amp plug in case someone would want to put the old sound system back in. 5JBL Camry Install TipsHead unit wiring harness are different depending on the manufacturer, so I can share my experience with paring this with Kenwood's DPX793 in a 2002 SE Camry with JBL factory system. This wiring harness will do you well if you have ONE plug in the back of your original headunit. In my case, I did not use the SOLID blue or orange wire on the METRA harness, power antenna and illumination, respectively.Wire black and white/black from THIS harness to your GROUND (BLACK) on your headunit harness. Should be like a Y. CONNECT BOTH METRA GROUND TO HEADUNIT GROUND.Wrap tape around base of METRA harness where wires connect to plastic clip because this harness is NOT POTTED. I was getting a lot of buzz before I pulled the tines through the plastic and taped in place. Check the Metra's tines if getting buzz. 4Splice blue/white stripe with solid blue wires in same spliceGot this for my Toyota Avalon 2002 XLS. Wired everything up initially and.... did not work. Display and buttons powered and lit up, was able to connect via BT, but no sound. Had to pull teeth just to get some extra information to get it to work. Was almost to the point of bringing it in to a car stereo place and pay the butcher's bill for installation when I thought to call up Crutchfield (where I bought my receiver). The guys over there were SUPER helpful. They let me know that my issue was probably the blue stripe wire on the harness and they suggested that I splice both the solid blue wires along with the white stripe wire in order to get the sound to work. No where in the instructions for the harness or the receiver was this suggested and I am new to doing this on my own, so I would never have guessed to try this.TL;DR splice blue/white stripe along with blue wires. Wish there was more details in instructions and/or a how to video on YT or something 4I very highly recommend this product. Buy it. Makes installing simple.This worked perfectly and easily on my 2007 Toyota Highlander with a JBL sound system and no navigation. I struggled to install an android head unit. I read in various Toyota sites that nothing works for Toyota Highlanders like mine. Someone here said that this Metra 70-8113 harness worked on their Highlander so I bought it. It looks like Metra upgraded this harness because people complained that it didn't have either the power antenna or power amp wire (one of the two) and I think it didn't have the illumination wire. Mine had both power antenna and power amp, and the illumination wire, all wires were there.Installation:1) Connect all wires from your Metra harness to the wires from your head unit harness. Battery to battery, ACC to ACC, illumination to illumination, antenna to antenna, amp to amp, ect. It has a simple manual you can follow.2) Very important. You'll see 2 black wires from the Metra harness (1 has a white line). Connect both of those to the 1 black wire from your head unit harness. These 3 wires are grounds.3) Connect the 2 RCAs from the Metra harness to the 2 RCAs coming out of your head unit.4) Insert your head unit harness into the head unit. Connect the Metra harness to your Toyota harness and you're done.It's really simple just make sure you connect those 2 black wires from the Metra harness to the 1 black wire from your head unit harness.Great product and great value and very easy to install. :) 5Does the jobDoes the job for my '01 Toyota Camry with JBL sound system. Linked it to a new Pioneer head unit. Combined the two ground wires on the Metra and the blue and blue/white wires to match the single ground and blue/white wires from the Pioneer. Orange illumination wire was ignored. Took a second attempt to properly match the rca's but all in all the new system sounds great. 5
See All Reviews
Shipment tracking ID will be provided after your product(s) is dispatched. The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing. In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.
  • Return or exchange requests can be made within 10 days of the delivery date.
  • To return or exchange any items, please email us at info@directnine.ae, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • DirectNine reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.
Description
  • Factory amplifier interface harness that plugs in behind the radio
  • Retains the factory amplifier
  • Harness is set up for low level inputs using RCA Outputs from the aftermarket radio
  • 20-pin connector
Reviews

Customer Reviews

Worked perfectly in 03 Camry XLE to use factory JBL AmpWorked perfectly allowing my new Planet Audio Double DIN Receiver to utilize the factory JBL Amp in my 2003 Camry XLE. I heat shrinked all unused wiring, speaker etc in the Planet Audio wiring harness and used the FL, FR, RL & RR RCAs plugs to connect to the PA Harness. Note: The male RCAs in the Metra harness are color coded to correlate with the speaker colors so Gray is front passenger (US), White is front driver (US), Violet is Rear passenger and Green is Rear Driver. (USA Driver with steering wheel on LH dash location). Also remember to connect the Blue/White wire to turn on the JBL amp, Use the P Cont, Rem Amp or ANT power blue wire in the receivers harness. Works perfectly, no engine noise either. 5Received a fake Metra harnessProduct that was shipped to me is a fake Metra 70-8113. Look at the picture and compare it to the product listing picture. IT'S TOTALLY DIFFERENT. The RCA connectors are different and looks cheap. It's not in pairs with a noise isolator loop like the original. The plug is also a different color. Metra only has 1 product design of this harness. When I plugged my Pioneer head unit up to it, there was this buzzing sound. I thought it was the HU. After two days of investigating, I noticed the difference between this harness and the real Metra harness. Beware of fake harnesses not sold by Amazon. 1Two ground wires if you have an ampJust writing a review to talk about my specific circumstance. Unfortunately, a lot of car or radio harnesses differ, so your mileage may vary. I bought this to replace the head unit for my 2002 Toyota Highlander with JBL sound system, which includes a factory amp. The stereo I purchased was a JVC KD-X330BTS with RCA connections in the back for the four speakers.Problem: The wires are color-coded, and this harness comes with a small sheet that details what each wire does, which you can use to double-check with the stereo descriptions. The problem I had was that there was an "extra" black with white stripe wire that I could not identify. After matching only the wires that needed to be matched and leaving this one out, my speakers ended up outputting loud static.Solution: It turns out that this is another ground wire (for the amp?) and needed to be connected to the solid black ground wire on this Metra harness and the solid black ground wire on my radio harness. I did this by twisting the Metra wires together in such a way that they could be inserted into one end of a butt connector, and then crimped. The radio ground wire went into the other end of the butt connector as normal.All-in-all, it's fairly simple to use. However, I'm knocking off a star because it really wasn't clear on the wire diagram that came with this harness that the black/white-stripe wire was another ground wire. Hopefully this helps anyone who ran into my specific issue.(Side note: unlike some others who reviewed this product, my Metra harness did in fact come with an orange (or orange/white-stripe) illumination wire to match my stereo's.) 4Will not work for a Lexus ES 330This product looks great and is easy to install, the only problem is that this does not work on a stock base stereo for a 2004 Lexus ES 330. It has an amp on the stock system, which requires some components that are not included in this kit.After I found this out, I ordered an Axxess TYTO-01 which came with excellent instructions, powered up an aftermarket head unit, and also allowed me to retain the stock amp. 5JBL audioI installed this with a Bluetooth head unit on my 2003 Solara with a JBL system. I tried many ways to shield the wiring, grounds, and filters. But it never stopped the sequel (with RPM) that was induced by the JBL system. I ended up reinstalling the stock head unit and getting a cigarette lighter bluetooth transmitter for my podcasts. 1I originally had cut the speaker plugs off to hook it up to the harness that came with the radio and tried passing the speaker sI used this to make it easier to hook up a panasonic stero in my 2003 Toyota Highlander with JBL amp/ speaker system. I originally had cut the speaker plugs off to hook it up to the harness that came with the radio and tried passing the speaker system through the original JBL amp and could not get rid of the horrible hissing/feedback. So I bypassed the amp and routed new speaker wiring to the jbl speakers to the radio harness which worked great! It was way easier using this harness than trying to figure out which wires to cut off and use on the JBL amp plug and saves the original amp plug in case someone would want to put the old sound system back in. 5JBL Camry Install TipsHead unit wiring harness are different depending on the manufacturer, so I can share my experience with paring this with Kenwood's DPX793 in a 2002 SE Camry with JBL factory system. This wiring harness will do you well if you have ONE plug in the back of your original headunit. In my case, I did not use the SOLID blue or orange wire on the METRA harness, power antenna and illumination, respectively.Wire black and white/black from THIS harness to your GROUND (BLACK) on your headunit harness. Should be like a Y. CONNECT BOTH METRA GROUND TO HEADUNIT GROUND.Wrap tape around base of METRA harness where wires connect to plastic clip because this harness is NOT POTTED. I was getting a lot of buzz before I pulled the tines through the plastic and taped in place. Check the Metra's tines if getting buzz. 4Splice blue/white stripe with solid blue wires in same spliceGot this for my Toyota Avalon 2002 XLS. Wired everything up initially and.... did not work. Display and buttons powered and lit up, was able to connect via BT, but no sound. Had to pull teeth just to get some extra information to get it to work. Was almost to the point of bringing it in to a car stereo place and pay the butcher's bill for installation when I thought to call up Crutchfield (where I bought my receiver). The guys over there were SUPER helpful. They let me know that my issue was probably the blue stripe wire on the harness and they suggested that I splice both the solid blue wires along with the white stripe wire in order to get the sound to work. No where in the instructions for the harness or the receiver was this suggested and I am new to doing this on my own, so I would never have guessed to try this.TL;DR splice blue/white stripe along with blue wires. Wish there was more details in instructions and/or a how to video on YT or something 4I very highly recommend this product. Buy it. Makes installing simple.This worked perfectly and easily on my 2007 Toyota Highlander with a JBL sound system and no navigation. I struggled to install an android head unit. I read in various Toyota sites that nothing works for Toyota Highlanders like mine. Someone here said that this Metra 70-8113 harness worked on their Highlander so I bought it. It looks like Metra upgraded this harness because people complained that it didn't have either the power antenna or power amp wire (one of the two) and I think it didn't have the illumination wire. Mine had both power antenna and power amp, and the illumination wire, all wires were there.Installation:1) Connect all wires from your Metra harness to the wires from your head unit harness. Battery to battery, ACC to ACC, illumination to illumination, antenna to antenna, amp to amp, ect. It has a simple manual you can follow.2) Very important. You'll see 2 black wires from the Metra harness (1 has a white line). Connect both of those to the 1 black wire from your head unit harness. These 3 wires are grounds.3) Connect the 2 RCAs from the Metra harness to the 2 RCAs coming out of your head unit.4) Insert your head unit harness into the head unit. Connect the Metra harness to your Toyota harness and you're done.It's really simple just make sure you connect those 2 black wires from the Metra harness to the 1 black wire from your head unit harness.Great product and great value and very easy to install. :) 5Does the jobDoes the job for my '01 Toyota Camry with JBL sound system. Linked it to a new Pioneer head unit. Combined the two ground wires on the Metra and the blue and blue/white wires to match the single ground and blue/white wires from the Pioneer. Orange illumination wire was ignored. Took a second attempt to properly match the rca's but all in all the new system sounds great. 5
See All Reviews
Return And Refund Policy
  • Return or exchange requests can be made within 10 days of the delivery date.
  • To return or exchange any items, please email us at info@directnine.uk, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • DirectNine reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.
Delivery Policy
Shipment tracking ID will be provided after your product(s) is dispatched. The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing. In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.

Recently Viewed

BACK TO TOP